aluminum welding tip

Welding fan I salute you

aluminum welding tip

“Aluminum welding tip: A blog post about aluminum welding. This topic is often surrounded by myths, be it regarding preheating, reheating or the choice of filler material.

It seems that many are put off by this. If you’re interested in this topic, I highly recommend watching my video below where I share some tips and tricks. As a daily practitioner, I can assure you that a lot is possible with aluminum welding.

This craft can be learned, provided you have the desire to do so, and in my opinion that is the most important key.

For aluminum welding, you need an ACDC TIG welding machine and tungsten electrodes as filler material – green tungsten electrodes are best suited for normal aluminum. If you want to weld cast aluminum, I recommend the white electrodes, as the material is often very dirty. Patience and enjoyment of the craft are of course also crucial.

A few tips: Avoid cutting material with the cutting wheel, as this leaves dirt in the cut edge. You should also understand that the heat expands, especially if you weld slowly.

the heat out. This is experience that you have to acquire bit by bit.

Of course, aluminum welding generates a lot of heat in the material, and the welding speed should be relatively high. However, this is not a problem, but rather a learning and experience point. Below you’ll find links to videos on my YouTube channel, and we also offer a comprehensive online course on the subject to make learning even quicker and easier.”

Important protect yourself NOW simply & cheaply from welding fumes!

For even more insights & advice subscribe to my WhatsApp Broadcast ( Free)

Take a look at our welding store !!!