Welding aluminum trays 3mm Welding tips

Welding aluminum trays 3mm Welding tips

 

 

Greetings from Schweißfan,

 

 

 

Welding aluminum trays 3mm Welding tips

 

If you would like to weld aluminum trays, this is the right place for you. Here are a few tips for you on the best and easiest way to weld aluminum trays.

 

 

 

The first thing you need to do is to optimally align the parts to be welded so that you can weld them very easily and perfectly afterwards. I.e. make a stapler at the outermost tip so that you can bring the sheet together nicely. Usually it does not fit together perfectly after edging, so you have a larger gap, which is not ideal at the beginning.

 

 

 

aluminum spoon welding tips how welders weld aluminum free tips aluminum welding

 

 

Now you can use a wooden or rubber mallet, for example, to bring the sheet metal together so that the gap is completely closed and the edges of the sheet metal are perfectly aligned.

 

 

Now you have to decide whether you just want to run the whole thing or weld with filler material. The Possibility to pulse the whole thing you would also have

 

 

What’s the best way to start now? I would always start welding from the point where you tack welded. Therefore, make the stapler slightly larger so that it does not melt again at the start of welding and the sheet metal shifts again.

 

 

Alu bucket alu welding machine like welding machine action welding inverter WELDINGER WE 2003P ACDC with TIG set pressure regulator welding helmet

 

 

and you take the heat to the thickest part of your weld seam. If you start welding from the other side, you have more material and take the heat with you to the outside. It can happen that the sheet sags too much or even drips off at the end.

 

 

The whole thing can now be run or welded with filler material. I would recommend a 2.4 additive here, which is completely sufficient to achieve a nice, fine and flat scale. have.

 

 

 

 

If you do the whole thing with 3 mm aluminum sheet metal like I do, you can weld with 150 A without any worries. It’s a personal story, of course. I am a very fast welder, so I always weld with a little more amperage.

 

Training cube aluminum spoon learn to weld tips

 

 

When stapling, I always recommend choosing a little more amperage because it is simply faster and you only have to make one staple.

 

 

Important protect yourself NOW simply & cheaply from welding fumes!

7005-01_9120-01_product-01-0816-300x245.jpg

 

 

 

 

I think the whole thing is even easier if you watch it in video form. I’ll throw you the link below, because of course I recorded the whole thing in video form on my channel.

 

 

 

Find out more about us here!

 

Check out my YouTube channel!

Welding aluminum trays 3mm ,Welding tips

 

 

So then I hope I was able to help you with the article Welding aluminum trays 3mm, welding tips. I would be delighted to receive your feedback. And if you would like to find out and see more about welding, then take a look at our channels. Welding is a daily topic there.

Similar videos