WELDINGER WE 206P AC/DC digital TIG welding inverter for aluminum

WELDINGER WE 206P AC/DC digital TIG welding inverter for aluminum

• Digitally controlled TIG welding inverter WELDINGER WE 206P AC/DC with HF ignition, 2-cycle/4-cycle operation and pulse
• Precisely adjustable TIG parameters and up to 10 storable welding jobs via push-button operation
• with 200 A output, high-quality 4 m TIG hosepack WP-26 and integrated electrode welding unit
• for aluminium (AC), steel, stainless steel, cast iron, copper, bronze, magnesium and galvanized material (DC)
• 4 m ground cable with 9 mm mandrel, weight 14.75 kg, dimensions 496x212x380 m

•  

  WELDINGER TIG welding inverter WE 206P AC/DC

  Digitally controlled welding machine for welding aluminum

  Can also be used for steel, stainless steel, cast iron, copper, bronze, magnesium and galvanized material

  The WELDINGER WE 206P ACDC is a digital TIG welding inverter for DC and AC welding. All TIG functions can be controlled and saved via the clearly laid out digital display using push buttons. An integrated parameter diagram provides information at a glance about the selected settings and the status of the welding process.

  In contrast to simpler TIG devices, the WE 206P ACDC allows precise fine adjustment of all relevant values in order to achieve the best results with the respective material. Up to 10 welding jobs can be saved, which significantly shortens the work for frequently used material, as the settings only have to be made once.

  Adjustable in TIG mode:
  GAS PREFLOW The gas pre-flow time is the time between pressing the torch trigger and opening the gas valve until the arc is formed. Under normal conditions, the value should be above 0.5 s. The setting range is between 0 and 15 s.
  START LIGHT ARC The starting current starts after the burner button is pressed. The higher the starting current, the easier the arc is formed. The setting range is between 10-200 A.
  RISE TIME The rise time from the starting current to the welding current. The setting range is between 0-15 s.
  WELDING CURRENT The welding current setting range is between 10-200 A.
  AC You need this function when welding aluminum. The higher the AC frequency, the better the welding quality and the concentration of the arc. The adjustment range is between 20-200 Hz.
  AC BALANCE This controls the ratio of the duration between the positive and negative phases. If you reduce the balance value, you introduce more heat into the material, create a narrower seam and a deeper penetration. At the same time, you reduce the heat load on the tungsten electrode.

  By increasing the value, you apply less heat to the material and achieve a wider seam with less penetration. The load on the electrode is higher. The adjustment range is between -40 and +40%.
  Peak current: The setting range of the peak current is between 10-200 A.
  PULSE The pulse frequency is the value at which the pulse varies between the welding current and the base current. The setting range is between 0.2-20 Hz.
  ON DURATION (PULSE) This is where you set the duration of the pulse to influence the depth of the burn-in. While a higher value ensures deeper firing, a lower value means less heat is introduced into the material. This reduces the risk of burning through thinner sheets or small parts during welding. The setting range is between 10-90%.

  BASE CURRENT The base current makes it easier to control the heat that is introduced into the material. The base current can only be set during pulse welding. The setting range is between 10-200 A.
  STROMA FALL The descent time from the welding current to the final current. The setting range is between 0-15 s
  CRATER CURRENT Here you set the final current for the final crater filling. The setting range of the closing current is between 10-200 A.
  GAS AFTERFLOW The gas afterflow time is the time from when the arc cools down until the gas valve closes. While gas flows in, it protects the solidifying molten bath from oxidation and cools the tungsten electrode. If the post-flow time is too short, this can result in oxidation of the weld seam. The setting range is between 0 and 15 s.

  In TIG mode, you also have the option of choosing between normal and pulsed operation, as well as between 2- and 4-cycle operation.

  Manual electric welding
  You can also achieve professional results when electrode welding with the WE 206P ACDC. Stick electrodes with a diameter of 1.6-4 mm can be welded. A suitable electrode holder cable for the WE 206P ACDC is available separately in our store (e.g. article 2007).

  The WELDINGER WE 206P ACDC is a modern welding inverter for aluminum welding with an excellent price/performance ratio. In our store you will find an extensive range of spare and wear parts, as well as tungsten electrodes and TIG welding rods for every conceivable application. If you do a lot of TIG welding and attach importance to sharpening your tungsten needles yourself, we recommend the compact WELDINGER TIG grinding boy (item 3726) or the mobile TIG grinding boy junior (item 5278) for optimum sharpening.

  Technical data WELDINGER WE 206P AC/DC digital

  Mains connection	230 V/60 Hz
  Open circuit voltage	56 V
  Duty cycle 60% TIG/MMA	200 A/180 A
  Mains fuse	16 A inert
  Adjustable welding current TIG/MMA	10-200 A/20-200 A
  Protection class	IP21S
  Pre/post-flow time gas	0-15 s
  Pulse rate	0.5-1000 Hz
  Pulse width	0.2-20 Hz
  Promotion/relegation time	0-15 s
  AC frequency	20-200 Hz
  AC balance	-40 to +40%
  Arc Force	0-100 A
  Starting current	10-200 A
  Base current	10-200 A
  Weight	14.75 kg
  Dimensions (LxWxH)	496x212x380 mm

  Scope of delivery WELDINGER WE 206P AC/DC digital

  WELDINGER TIG welding inverter WE 206P AC/DC
  TIG torch type WP26, 4 m long
  Ground cable, 4 m long Mandrel 9 mm
  Gas hose with quick coupling, 1.5 m long
  1x ceramic nozzle size 4 and 5 each
  1x long burner cap
  1x clamping sleeve 1.6 mm
  1x clamping sleeve 2.4 mm
  1x adapter sleeve housing 3.2 mm
  1x replacement mandrel 9 mm for earth cable
  Operating instructions

  If you have any questions about this product, please do not hesitate to contact us.

  Supply voltage:	230V
  Technology:	IGBT inverter
  recommended use:	Do-it-yourselfer semi Professional / Craft
  Welding process:	MMA manual metal arc welding TIG welding TIG
  Special welding functions:	Pulse 2cycle/4cycle selectable Hotstart Antistic HF ignition Lift-Arc ignition Memory function
  weldable materials:	Steel Fe Stainless steel SS Aluminum Al CuSi Brazing
  Welding cable / torch:	Detachable burner Gas connection hose with quick-release coupling 4m earth cable
  Cooling type:	Air cooling / fan