WELDINGER TIG welding inverter WE 2030P AC/DC pro digital (without hosepack)

Pre-sale: WELDINGER TIG welding inverter WE 2030P AC/DC professional

Professional digital welding machine with LCD display for aluminum welding

Versatile use for steel, stainless steel, aluminium, cast iron, copper, bronze, magnesium and galvanized material

The WELDINGER WE 2030P AC/DC is a digital IGBT TIG welding inverter for DC and AC welding. All welding functions can be controlled and saved via the clear LCD digital display using a push button. An integrated parameter diagram provides information at a glance about the selected settings and the status of the welding process. In contrast to simpler TIG devices, the WE 2003P ACDC allows precise fine adjustment of all relevant values in order to achieve the best results with the respective material. A job memory for up to six welding jobs and temperature-controlled fan cooling round off the features.

Adjustable TIG parameters:

GAS PREFLOW The gas pre-flow time is the time between pressing the torch trigger and opening the gas valve until the arc is formed. The setting range is between 0.1 and 1 s.
START CURRENT (selectable in 4T mode). The starting current starts after the burner button is pressed. The higher the starting current, the easier the arc is formed. The setting range is between 10-200 A.
STARTING TIME The rise time from the starting current to the welding current. The setting range is between 0-5 s.
WELDING CURRENT The setting range of the welding current is between 10-200 A.
PEAK CURRENT: The setting range of the peak current is between 10-200 A.
BASE CURRENT The base current makes it easier to control the heat that is introduced into the material. The base current can only be set during pulse welding. The setting range is between 10-200 A.
DESCENT TIME The descent time from the welding current to the final current. The setting range is between 0-5 s.
CRATER CURRENT Here you set the final current for the final crater filling in four-cycle mode. The setting range is between 10 and 200 A.
GAS AFTERFLOW The gas afterflow time is the time from when the arc cools down until the gas valve closes. While gas flows in, it protects the solidifying molten bath from oxidation and cools the tungsten electrode. If the post-flow time is too short, this can result in oxidation of the weld seam. The setting range is between 0.1 and 10 s.
PULSE The pulse frequency is the value at which the pulse varies between the welding current and the base current. The setting range is between 0.5-200 Hz.
PULSE WIDTH Here you set the duration of the pulse to influence the depth of the penetration. While a higher value ensures deeper firing, a lower value means less heat is introduced into the material. This reduces the risk of burning through thinner sheets or small parts during welding. The setting range is between 5-100%.
AC FREQUENCY This function is required for aluminum welding. The higher the AC frequency, the better the welding quality and the concentration of the arc. The setting range is between 40-250 Hz.
AC BALANCE This is used to adjust the ratio of the duration between the positive and negative phases. If you reduce the balance value, you introduce more heat into the material, create a narrower seam and a deeper penetration. At the same time, you reduce the heat load on the tungsten electrode. By increasing the value, you apply less heat to the material and achieve a wider seam with less penetration. The load on the electrode is higher. The setting range is 20-50%, the factory setting is 20%.

Of course, the device also has a mocking function.

In TIG mode, you also have the option of choosing between normal, spot welding and pulsed operation, between HF ignition and Lift Arc, and between 2- and 4-cycle operation.

Manual metal arc welding (MMA)
You can also achieve professional results with electrode welding using the WE 2030P ACDC. Welding current, hot start and arc force are adjustable. Hot Start increases the starting current, ensures a good welding start and prevents the electrode from sticking. Arc Force allows the dynamics of the arc to be adjusted. If the arc length is reduced, the amperage automatically increases to stabilize the arc. A lower value produces a softer arc with lower penetration, a higher value produces a harder, short arc for deeper penetration. The setting range is between 0-10. 1.6-4 mm diameter electrodes can be welded. Electrodes can be welded either DC or AC.

A suitable electrode holder cable for the WE 2030P AC/DC professional is available separately in our store (e.g. item 4789).

The WELDINGER WE 2030P AC/DC professional is perfect for advanced users.

In response to many customer requests, we offer the basic unit without TIG torch. We recommend professional hosepacks from WELDINGER made in Germany as WP9 (item 5956), WP17 (items 5951, 5952, 5955) or WP26 (items 5954, 5958, 5684) with separate gas/electricity connection, NW5 gas coupling and 13 mm mandrel.

In our store you will find an extensive range of spare and wear parts, as well as tungsten electrodes and TIG welding rods for every conceivable application. The TIG wear part set 1 (item 4141) is recommended as a practical starter set. If you do a lot of TIG welding and attach importance to sharpening your tungsten needles yourself, we recommend the compact WELDINGER junior TIG grinder (item 5278) for optimum sharpening.

Technical data

Scope of delivery

WELDINGER TIG welding inverter WE 2030P AC/DC professional
Copper earth cable, 4 m long, 13 mm mandrel
1.5 m gas hose with quick-release coupling
TIG torch is not included in the scope of delivery!
Operating instructions